Schlumberger

Mnemonics, Tools, EPULSEXR650


CodeEPULSEXR650
TechnologyMWD
DisciplineDrilling
MethodMWD
Description6.5 inch Direction and Inclination and Gamma Ray Telemmetry Tool (EPulse XR)

Related channels
ChannelDescription
ANGX Quadrant Calibration Angle
APWD Low Resolution Annulus Pressure, Real-Time
AZIM_CONT Continuous Hole Azimuth
BATV_LD Loaded Battery Voltage
BX_ROT Rotating Magnetometer, X-Axis
CORR_INDEX Survey Station Correction Index
CRPM Collar Rotational Speed
DHAP Downhole Annulus Pressure
DIP Dip Angle
DLMSG Downlink Command
ECD Equivalent Circulating Density
GR Gamma Ray
GR_CONF Gamma Ray Bit Confidence
GX_ROT Continuous Rotational Gravity X-axis
HV_MAX High Voltage Maximum
HV_MIN High Voltage Minimum
INCL_CONT Continuous Inclination (Hole Deviation)
INCL_RAW Uncorrected Survey Station Inclination
IPRS Internal Pressure
IPWD Low Resolution Internal Pressure, Real-Time
MAV Minus Analog Voltage
NRPM Negative Rotation Indicator
PAV Plus Analog Voltage
PRECNUM Downlink Precursor
QLTY Survey quality: GOOD or BAD versus criteria
SAG_CORR Survey Station Sag Correction
SBX Magnetic X-Axis Reading, Stationary
SBY Magnetic Y-Axis Reading, Stationary
SBZ Magnetic Z-Axis Reading, Stationary
SDEP_RAW Unmodified Survey Station Depth
SGX Gravity X-Axis Reading, Stationary
SGY Gravity Y-Axis Reading, Stationary
SGZ Gravity Z-Axis Reading, Stationary
SHKR Shock Rate
SHKRSK Shock Risk
STICK Stick Slip Indicator
STUCK Percent Time Stuck Below 5 RPM Indicator
SVY_SOURCE Survey Station Source Tool
SVY_USAGE Survey Usage Limitations Indicator
TEMP Computed Borehole Temperature
TEMP_DNI Direction and Inclination Sensor Temperature
TOOLB Tool Magnetometer Magnitude from the Long Survey Axes
TOOLBYZ Root-Mean-Square of the Long Survey By and Bz Axes
TOOLG Tool Gravity Magnitude from the Long Survey Axes
TOOLGYZ Root-Mean-Square of the Long Survey Gy and Gz Axes
VGAP Gap Voltage
ZGAP Gap Impedance
ZGAPRC_E EMAG Gap Impedance, Recorded Mode

Related parameters
ParameterDescription
BATT_POSITION Battery Location
BOTGAPDC_TOGAP GAP Center to Bottom of GAP Collar
CHANGE_SIGNAL Equipment Change Signal
COLLAR_LENGTH Drill Collar Length
DNI_LOCATION DNI to Tool Top
DNI_TO_REF Direction and Inclination Sensor to Reference Distance
FG_TO_TBOT Top of Fiberglass to Tool Bottom
GR_SOURCE Source Selection for Record Mode Gamma Ray
REF_TO_TBOT Reference to Tool Bottom
REF_TO_TOPSPEC Pressure to Top of SPEC Collar
TFO Toolface Angle Offset
UBHO_LENGTH UBHO Length
XO_LENGTH Crossover Length


Return to Curve Mnemonic Dictionary